PRODUCTS
Give the Best Performace with
Lithium Foil
Most suitable for low-volume production
Available in requisite sizes
- 厚み
-
0.1mm～3.0mm
(Tolerance: ±0.01mm) - 幅
-
15mm～100mm
(Tolerance:±0.5mm) - 長さ
- Optional*
- 重さ
- Optional
※For details, see the REQUEST A QUOTE site.
Rolling Lithium Foil
Even thinner than conventional extruded products
- 厚み
-
0.02mm～0.09mm
(Tolerance: ±0.005mm) - 幅
-
30mm～60mm
(Tolerance: ±0.5mm) - 長さ
- Optional*
- 重さ
- Optional
※For details, see the REQUEST A QUOTE site.
Lithium Foil With Substrate
Lithium foil is laminated on current collectors/Single-sided or double-sided
Substrate:Copper, SUS and nickel foil
Li (Signle/Double)・Li position
Single・Edge-aligned, Single・Center, Single・Full
Double・Edge-aligned, Double・Center, Double・Full
Extrusion
- 厚み
-
0.1mm～3.0mm
(Tolerance: ±0.01mm) - 幅
-
15mm～100mm
(Tolerance: ±0.5mm) - 長さ
- Optional*
Rolling
- 厚み
-
0.02mm～0.09mm
(Tolerance: ±0.005mm) - 幅
-
30mm～60mm
(Tolerance: ±0.5mm) - 長さ
- Optional*
Substrate:Cu
- 厚み
- 0.006mm～0.02mm
- 幅
- 50mm～150mm
Substrate:Ni
- 厚み
- 0.01mm only
- 幅
- 75mm、110mm
SUS316L
- 厚み
- 0.01mm only
- 幅
- 110mm、140mm
※For details, see the REQUEST A QUOTE site.
Lithium Alloy Foil
Suitable for low-volume production in requisite sizes
Please contact us for the composition details
- 添加物
- Mg, Zn and Al, etc
- 添加量
-
wt%
（Maximum addition amount: roughly up to 20wt％.) - 厚み
- Optional*(Tolerance: ±0.01)
- 幅
- Optional*(Tolerance: ±0.5mm)
- 長さ
- Optional*
※For details, see the REQUEST A QUOTE site.
Sheet Type Lithium
Packed in an aluminum-laminated bag per sheet
Suitable for single-use in battery experiments
Extrusion
- 厚み
-
0.1mm～3.0mm
(Tolerance: ±0.01mm) - 幅
-
15mm～100mm
(Tolerance: ±0.5mm) - 長さ
- 5mm～300mm
Rolling
- 厚み
-
0.02mm～0.09mm
(Tolerance: ±0.005mm) - 幅
-
30mm～60mm
(Tolerance: ±0.5mm) - 長さ
- 5mm～300mm
Sheet Type Lithium With Substrate
Lithium Foil With Substrate in sheet.
Packed in an aluminum-laminated bag per sheet.
Extrusion
- 厚み
-
0.1mm～3.0mm
(Tolerance: ±0.01mm) - 幅
-
15mm～100mm
(Tolerance: ±0.5mm) - 長さ
- Optional*
Rolling
- 厚み
-
0.02mm～0.09mm
(Tolerance: ±0.005mm) - 幅
-
30mm～60mm
(Tolerance: ±0.5mm) - 長さ
- Optional*
Substrate:Cu
- 厚み
- 0.006mm～0.02mm
- 幅
- 50mm～150mm
Substrate:Ni
- 厚み
- 0.01mm only
- 幅
- 75mm、110mm
SUS316L
- 厚み
- 0.01mm only
- 幅
- 110mm、140mm
※For details, see the REQUEST A QUOTE site.
Coin Type Lithium
Punching operation is unnecessary during experimets
Packed in an aluminum-laminated bag per sheet
- 厚み
-
0.2mm～3.0mm
(Tolerance: ±0.01mm) - 幅
-
0.02mm～0.09mm
(Tolerance: ±0.005mm) - 直径
- φ2㎜～φ100㎜
Lithium Wire/Rod
For a diversity of uses such as baterry materials and chemical catalyst
- 直径
- φ1㎜～φ13㎜
- 長さ
- optional*(As rods or with reel)
- 長さ
- Optional*
- 重さ
- Optional
※For details, see the REQUEST A QUOTE site.